An orderly and clean working environment is necessary for any workplace, but it takes on added importance at the shipyard. With potential electrocution dangers posed by electrical systems onboard ships or dockside facilities, an unkempt workspace can make hidden damage to electrical cables and control cables even more dangerous. Both employers and employees must be mindful of these risks to ensure that safety remains paramount within their work area.
Electrical shocks can bring about severe risks beyond the initial injury. A reflexive reaction may cause secondary injuries like falls. Proper personal protective equipment (PPE)s must be used with adequate training and procedures to safeguard employees and employers against electrocution or shock hazards.
1. Check Your Cables
Inspecting power cables and extension cords regularly is essential to prevent shock hazards. Ensuring that any damage, fraying, chemical wear or warping of the jackets are dealt with immediately through regular checks, as failure to do so could lead to an unsafe situation if not addressed promptly.
2. Inspect Electrical Connections
Shipyards need security, and to ensure this, regular system checkups must be performed. Fuse panels and generator switches should always be examined for any irregularities, as doing so drastically reduces the risk of electric shocks occurring on the premises. Every effort to detect inconsistencies in the electricity supply is a step towards improving shipyard safety. Such diligent measures are essential for safeguarding workers, equipment, and cargo.
3. Ensure That Equipment Is Properly Grounded
Safety is of the utmost importance regarding electricity and electrical components. Electronic equipment must be thoroughly grounded before operating to ensure proper performance and protection. Check each device and connection internally and externally to confirm they are suitably linked to one reliable grounding system. Focus on even the smaller configurations that are often neglected or overlooked to guarantee maximum safety and effectiveness now and in the future. Be sure there is minimal resistance and no disruption of service throughout the unifying circuit or device, as all electrical apparatus should remain firmly grounded throughout its entire cycle. Through this attention paid to precise detail within your network, reliability, protection, and consistent function of equipment will follow.
4. Acquire Knowledge
Ensuring your shipyard’s protection is something you shouldn’t take lightly. Arm yourself with all the necessary knowledge before undertaking repair jobs related to electricity. Make an effort to educate yourself and increase your expertise in these areas. As an additional precaution, careful consideration should always be taken in deciding whether it would be wiser to hand over particularly complex/risky projects to trusted professionals offering reliable risk management solutions. Exercising this due diligence will help ensure your premises remain as safe as can be.
5. Assess the Area
Ensure the safety of your shipyard by proactively evaluating potential shock hazards with these five easy steps. Carefully examine the area for any cables on the ground level that could be damaged and power lines overhead which may become entangled in machinery.
Some Examples of Electrical Hazard Risks
1. Getting an electric shock and being burned from touching a live wire
2. Fires from wires that are not working correctly
3. Overloading circuits, so they break
4. Leaving electrical parts uncovered so people can touch them
5. Getting electrocuted or burned because you’re not wearing the proper safety gear
6. Explosions and fires from substances that catch on fire easily
7. Touching overhead power lines
8. Being in the water with exposed electrical wires
Staying safe when working with electrical systems requires forethought and proactive action. Don’t forget that wiring, cables and equipment are well done before starting a job. It could be the difference between life and death! When exposed to electricity, ensure you have protective eyewear and gloves ready because an ounce of caution is worth far more than a pound of cure.
At Cable Source, we offer reliable cables for industrial applications. With an extensive selection of high-quality electrical and flame retardant and fire resistant cables capable of heavy-duty use in oil & gas, petrochemical, offshore and marine industries, you can trust our prompt services to provide top-notch solutions.